Contact Us

METIS POWER

METIS Power is a global leader in power generation and energy storage systems and services. We build the world’s most adaptive fleet to address ever-increasing power demands for smoother and more agile user experiences. We prioritize collaborative relationships within our teams, and alongside our customers and partners.

METIS Power Generation System 

METIS Power Generation (MPG) Gas Turbine Packages

5MW – 8.5MW

Scalable & Configurable
5-8.5MW gas turbine packages, can be arranged in parallel to deploy 5 to 300MW power arrays.

Low Emission
Untreated emissions are less than 9 ppm (< 0.4 lb/MWh) and are reduced to less than 2 ppm (< 0.09 lb/MWh) with treatment.

Flexible Cycling & Modulation
A unique ability to perform multiple daily shutdowns/restarts, delivering substantial fuel savings without reliability trade-offs of other thermal engines.

Small Footprint
40′ x 10′ Single lift containers offers power density up to 18kW/sqft

 Long Maintenance Intervals
80,000 EOH Major Overhaul, 40,000 EOH hot section inspection, Annual Borescope one day Inspection.

Minimized Service Downtime
Ability to swap primary turbines with temporary units for scheduled major maintenance, completing the full turnaround in under 48 hours.

Mobilized with Quick Installation
The self-contained, containerized design enables rapid deployment, allowing the unit to be relocated and fully installed in less than 72 hours.

 High Efficiency
Up to 34%, highest efficiency in class

MPG Gas Turbine Power Generation Line

ONE FOOTPRINT

A RANGE OF POWER

MPG Gas Turbine Power Generation Highlights

UnitMPG6000MPG7000MPG8000
Power (kWe)6,6307,8008,500
Gas Turbine TypeIndustrialIndustrialIndustrial
GearboxEpicyclicEpicyclicEpicyclic
Generator Voltage480V | 4.16kV | 13.8kV4.16kV | 13.8kV4.16kV | 13.8kV
Electrical Heat Rate (Btu/kWh)10,60610,2749,933
Exhaust Flow (lb/hr)207,146233,337224,607
Exhaust Temperature (°F)941914968
NOx Emissions (ppm)999
CO Emissions (ppm)161616
Noise Emission (@3FT)85 dBA85 dBA85 dBA
Steam Production (t/h)16.618.419.2
Footprint (L x W)10' x 40'10' x 40'10' x 40'
Weight (lbs) - dry126,300145,200147,800

Calculate Your Savings

Technical Resources

Learn More About MPG 

The MPG product line is engineered for high availability with a typical major overhaul interval of 40,000 operating hours. The exact duration can vary based on the site’s specific operating profile, including the frequency of starts.

To eliminate downtime during scheduled service, our MetisCare program guarantees uptime by providing a rapid (<48-hour) core turbine swap, ensuring your operations remain continuous.

The standard METIS Power Generation (MPG) product line features low emissions of 9 ppmv NOx and 16 ppmv CO. This performance level allows for deployments of approximately 80 MW without triggering the need for a federal Title V air permit, significantly simplifying the approval process.

For projects requiring larger capacity or stricter emissions control, MPG packages can be equipped with an optional Selective Catalytic Reduction (SCR) system. This advanced configuration reduces both NOx and CO to below 2 ppmv. By utilizing SCR, the potential deployable capacity can increase to as high as 600 MW, with the final limit being subject to the allowable ammonia slip regulations of the local jurisdiction.

A unique characteristic of the MPG product line is its ability to be shut down and restarted on a daily basis without harming the turbine casing. This is a key differentiator that separates MPG packages from the vast majority of gas turbines on the market, which are not designed to withstand the thermal stress of frequent cycling. This capability is crucial for applications with high load fluctuations, such as data centers.

In a parallel configuration, this provides significant fuel savings. Individual units can be taken offline during periods of low demand, which allows the remaining turbines to operate near 100% capacity—their point of peak efficiency—drastically reducing fuel consumption.

The MPG units utilize advanced gas turbine technology to respond quickly to load fluctuation. This quick response time makes them ideal for meeting sudden increases in electricity demand or balancing grid fluctuations, ensuring a reliable power supply.

MPG packages can be offered with a dual fuel capability which allows the unit to operate on gaseous fuel (natural gas) or liquid fuel (diesel).

Proudly Designed and Made in the United States

Request a Consultation

Request a Consultation

METIS Power Generation System 
error: Content is protected !!